Controlador de red 4IO

Unlike traditional solutions, signal transmission via the network no longer requires PLC or PC control. The hardware of the network controller IO controller can automatically map all physical switch signals without the need for ladder diagram or C language programming. With a network IO controller, input signals can be easily transmitted to the other end of the network via Ethernet, eliminating the need for programming or a separate controller for control.

Zongheng Intelligent Control 4IO network controller can transmit switching signals through the IP network, which can completely replace the existing cable-based signal transmission solutions. This product has 4DI, 4DO and 4AI and an Ethernet port. Using 4IO network controllers in pairs can transmit 4 sets of input and output signals to a PLC or DCS control system through the network.

Características

● 4 digital inputs, 4 digital outputs, and 4 analog inputs;

● DO follows AI/DI remotely, and logic can be configured freely;

●Transmit physical signals through Ethernet;

● Point-to-point/point-to-multipoint networking communication;

● Modbus TCP/RTU adaptive;

● I/O is completely isolated from the system;

● The power supply has good overcurrent, overvoltage, and anti-reverse connection protection functions;

● Rich indicator lights, comprehensive view of status, timely troubleshooting;

● Software and hardware dual watchdogs ensure stable operation of the equipment.

Technical Parameters

Parámetros de red

Tipo de red	Ethernet
Número de puertos de red (10/100M)	LAN*1
Tipo de puerto de red	Señal Ethernet RJ45
Protección contra el aislamiento electromagnético	15KV electromagnetic isolation
Cross-connect automatic switching	√
Transformador de red externo	innecesario

puerto serie

Número de puertos	RS485*1
estándar	RS485: bloque de terminales de 2 posiciones (A, B)
velocidad en baudios	600～921600bps
bits de datos	8,9
Bit de parada	0.5 , 1 , 1.5 , 2
Dígito de control	NONE (sin bit de paridad) EVEN (paridad par) ODD (paridad impar)

DO

Número de interfaces	4 relay outputs
estándar	(NO, NC, COM)*4
AC	250V 10A
DC	30V 10A
Durabilidad mecánica	10^7
Appliance durability	10^5

DI (dry node)

Número de interfaces	6
estándar	DI*6, COM*1

DI (wet node)

Número de interfaces	6
estándar	DI*6, COM*1
examination range	5~50V->High 0~2V->Low

PI

Número de interfaces	2
estándar	PI*2, COM*1
examination range	10000Hz

AI

Número de interfaces	4
estándar	AI*4, COM*2
examination range	4~20 mA

suministro eléctrico

Operating Voltage	9~36V
Working current	200mA(aver)/340mA(max)@9V 50mA(aver)/85mA(max)@36V
examination range	10000Hz

EMC level

ESD	IEC61000-4-2, Nivel 4
sobretensión	IEC61000-4-2, Nivel 3
pulso de grupo	IEC61000-4-2, Nivel 3

Mechanical structure

Tamaño del equipo	159.5*115.5*27.6mm(L*W*H)
concha	have