How to set up the monitoring gateway to access the Internet . First, we need to connect the device. Plug the ADSL interface cable into the WAN port of the router. Next, connect the computer network card interface to the LAN port of the router. In this way, we have established a local LAN connection from the host to the router.
Then, we need to open the network configuration and make changes to the LAN. In the computer’s network connection properties, change the IP address and DNS server address to static, and set them as follows:
IP address: 192.168.1.x (where x can be 1 or other numbers)
Subnet mask: 255.255.255.0
Default gateway: 192.168.1.1 (here is the IP address of the router)
First, in terms of network configuration, we need to set up the operating system correctly. Therefore, in the computer’s network connection properties, change the IP address and DNS server address to static to ensure that there is no problem with their connection to the LAN.
Next, in the router’s management interface, we need to find the “Network Settings” option and click on it. The settings here will dictate how the router connects to the Internet.
In the network settings interface, we need to select “WAN port operator” for configuration. This means that we assign the client host an IP address and a DNS server address.
Next, you need to configure your WiFi network, security settings, and other routing settings.
Finally, find the “Save Configuration” button in the monitoring gateway router management interface and click it. This will update the router with the currently selected settings and ensure that all changes take effect.
1. Confirm the network topology, including whether the connections and configurations of routers, switches and other devices are correct.
2. Configure the IP address and subnet mask of the monitoring gateway to ensure that it is in the same network segment.
3. Configure the gateway’s DNS server address so that it can resolve domain names on the Internet.
4. Configure the default gateway of the gateway, pointing to the IP address of the router or switch connected to the Internet.
5. Configure the port mapping or forwarding rules of the gateway to point the ports that need to be accessed to the correct internal server.
The above are the basic setup steps. The specific operations may vary depending on the monitoring gateway network topology and device type. To ensure correct settings, please refer to the device’s official instructions or consult a professional.
In this article, we have explained in detail how to set up a monitoring gateway so that users can access the Internet. In summary, after connecting the device, changes need to be made to the local LAN. Make sure your operating system settings are correct and configure them in the router’s management interface, including WAN port, WiFi network, etc. Finally, remember to save all changes. If you follow the above steps, you can accurately configure the monitoring gateway and get online easily!