Categoria: Notícias (page 126)

In process control projects, communication problems between DCS and lower computer PLC or field instruments are often encountered. Many chemical plants now adopt a general contract plus subcontracting model when constructing. Each supplier provides its own control system (usually mostly…

The serial port server mainly includes: a power circuit module, an ARM9 processor, a network port circuit module, and a serial port circuit module. The ARM9 processor includes the following interfaces: at least one network port circuit interface and at…

RS485 principle This principle, also known as ANSI/TIAEIA-485, TIA-485-A or TIA/EIA-485, is jointly defined by the Electronic Industries Alliance and the Telecommunications Industry Association. Simply put, it is a method used in balanced digital multipoint systems. Standards that define the…

As we all know, the PPPoE protocol of industrial routers is a common dial-up Internet access method. So what is its principle? PPPoE: DNS protocol The Internet is essentially just a very large computer network, and in many ways is…

Released in 1962 by the Electronic Industries Association (EIA) and BELL and other companies; the full name of the RS 232C standard (protocol) is the EIA-RS-232C standard, where EIA represents the Electronic Industries Association, RS represents the recommended standard ,…

1.Contact control signal line: DSR: Data set ready, the data device is ready, indicating that the MODEM is ready for use. DTR: Data Terminal ready, the data terminal is ready, indicating that the data terminal can be used. RTS: Request…

The Electronic Industries Association (EIA) formulated and released the RS 485 standard in 1983, and it was revised by the Telecommunications Industry Association (TIA) and named TIA/EIA-485-A. Since the proposed standards proposed by EIA are all prefixed with “RS”, in…

RS-422 RS-422 (EIARS-422-AStandard) is the serial port connection standard for Apple’s Mac in osh computers. RS-422 is developed from RS-232 and is proposed to make up for the shortcomings of RS-232. RS 422 is a one-way, balanced transmission method for…

Siemens Profibus DP communication is often used for communication between PLC and other PLCs, remote substations, frequency converters, bus instruments and third-party DP equipment. The program is simple and the wiring is convenient. However, once the red light on the…

What is breaker failure protection? When the main protection action of the faulty electrical equipment issues a trip command but the circuit breaker refuses to operate, the protection action information of the faulty equipment and the current or other information…