Understand the CAN bus controller in principle

CAN (Controller Area Network) bus is a common real-time data communication protocol, widely used in automobiles, industrial control and other fields. The CAN bus controller is one of the key components for realizing CAN bus communication. This article will analyze the working principle of the CAN bus controller in principle to help readers better understand its functions and effects.

CAN bus controller

The CAN bus controller is a control chip used for CAN bus communication, which can achieve efficient communication between multiple nodes. Each node contains a CAN bus controller, which is responsible for processing data transmission and reception, as well as error detection and correction tasks. Typically, a CAN bus controller consists of hardware and software.

The hardware part of the CAN bus controller includes the CAN bus interface, core and interface circuit . The CAN bus interface is responsible for connecting nodes to the CAN bus to send and receive data. The core is the core of the CAN bus controller, which contains the logic circuits for controlling and processing data. The interface circuit is responsible for converting and adapting the signals between the CAN bus interface and the core.

The software part includes controller driver and application software. The controller driver is the software code that controls the CAN bus controller and is responsible for controlling the transmission and reception of data, as well as error detection and correction. Application software is a specific application developed based on the controller driver, and its functions are expanded according to needs.

CAN bus controller

During the working process of the CAN bus controller, nodes communicate with each other through messages. Each message consists of an identifier (Identifier) ​​and data. The sending node sends the message to the CAN bus, and the receiving node identifies the message through the identifier and processes it accordingly. The CAN bus controller is responsible for sending and receiving messages and performing error detection. During transmission, each message is accompanied by a CRC check bit to detect bit errors during transmission.

An important principle of the CAN bus controller is to support multiple nodes communicating at the same time. This is achieved through the arbitration mechanism of the CAN bus. When multiple nodes send messages at the same time, the CAN bus controller arbitrates based on the node’s priority to determine which node can send the message. The priority of communication is determined by the value of the identifier, with smaller identifiers having higher priority.

Another important principle is the transmission rate of the CAN bus controller. The CAN bus supports different transmission rates, the common ones are 1 Mbps, 500 kbps, 250 kbps, etc. The choice of transmission rate depends on the application requirements and the load of the CAN bus. A higher transmission rate can improve the efficiency of communication, but it will also increase the error rate in transmission.

All in all, the CAN bus controller is a key component of CAN bus communication. Through the collaborative work of hardware and software, efficient communication between nodes is achieved. By understanding the principles of CAN bus controllers, we can better understand its working principles and application scenarios, and provide reference and help for the development and application in related fields.

Contactar-nos